гарантия 7 лет
8 800 200 73 96


Wall panel interior KVINTA

  • Category:
    Wall panels
  • Coating type:
    PVC veneer, PVC, Ultrason
  • Material:


When mounting panels KVINTA through the expanded protrusion is formed a gap of 10 mm between the panels, which gives a static visual effect of the composition.

Interior wall panels are installed on any level surface (drywall veneer, plastered, spackled walls, plywood or wooden rails) using profiles which are attached to the frame or wall.
For installation it is necessary to partition space and profiles, preparing them to the appropriate sizes. In the groove of the L-profile insert panel trim (ledge down, pre-cut it on the panels of the Octave and fifth) according to the version of the docking panel, locking it with a klyaymera and nails. The L-profile is used at installation of panels with the start angle, and also when installing the bottom and the top. For registration of the final angle is used the final profile, internal and external corners applied universal corner profile. The finished form of the composition will give a flat floor skirting to match walls. Installation of baseboard recommended using clips or liquid nails.

Wall panel, accessories:

Attention! Image of door panels and arches, drawings of glasses, colors may vary from actual depending on color and resolution of the monitor.

Оставьте свой отзыв

Please rate on a scale of 5

Order the measurement

Enter Your Name
Enter Your E-mail
Enter the phone number
Your Locality
Select the date of measurement
A convenient time for You
Maximum file size: 10Mb (/pdf/jpg/png)